side-top.jpg (9897 bytes)

topbar.jpg (15827 bytes)

       WWW.KOBELCOWELDING.COM

PRODUCTS ->

CONTACT US

COMPANY INFO

COMPANY NEWS

MSDS &
DATA SHEETS

KOBELCO WELDING TODAY

WELDING VIDEO

KOBELCO WELDING NETWORK

HOME

  FRONTIARC-711   Flux cored wire for canbon steel

    FRONTIARC-711.jpg (9650 bytes)
     Code Data:  AWS: A5.20 E71T-1C, 1M / 12C,12M / ASME: SFA 5.20

     Approved by CWB.ABS
     Download a complete brochure

     Sizes: (.045 X 11, 28, 44, 55, 550)  (.052 x 44, 550)  (1/16 X 44, 55, 550)

  • All position flux cored wire for carbon steel 
  • All position welding for ship hulls, vehicles, bridges, chemical plant machinery and other metal fabrication.
  • Can be used with either 100% CO2 or 75% Ar + 25% CO2 shielding gas
  • Non-baked wire surface is covered with a special lubricant
    that creates smooth wire feedability and extended liner life
Recommended Welding Conditions
Wire Size Wire Feeding Speed (in/min) Current (A) DC-EP Voltage (V) Deposition Rate (lbs/hr) Wire Stick Out (in)
.045 180 140 24-27 5.0
245 180 26-29 7.0
330 220 27-30 9.0 5/8-3/4
440 260 29-31 11.5
560 300 29-32 15.0
.052 130 150 24-27 4.0
215 210 25-28 7.0
315 270 27-29 10.0 3/4-1
460 330 30-32 13.0
690 400 31-34 17.5
1/16 120 200 25-28 5.5
190 260 26-29 8.0
250 300 28-31 10.0 3/4-1
380 380 30-33 14.0
520 450 32-35 18.5

* Voltage shown are for 100% CO2 gas. For 75%Ar+25%CO2 use 2 volts less   than shown here.

 

  DW-50      Flux cored wire for canbon steel

DW-50.jpg (7033 bytes)

    Code Data:  AWS: A5.20 E71T-1C,1M/ 9C, 9M  /   ASME:SFA 5.20 
     Approved by ABS,CWB
     Download a complete brochure

        Sizes: (.045 X 28, 44, 550)  (.052 x 44, 550)  (1/16 X 44, 550)

  • All position flux cored wire for carbon steel , Fast freeze slag formation helps welding at vertical up position.

  • Fume generation lower than conventional flux-cored wire.

  • Better versatility, user friendly

  • Can be used with either 100% CO2 or 75% Ar + 25% CO2 shielding gas

  • Non-baked wire surface is covered with a special lubricant that creates smooth wire feedability and extended liner life

Recommended Welding Conditions
Wire Size Wire Feeding Speed (in/min) Current (A) DC-EP Voltage (V) Deposition Rate (lbs/hr) Wire Stick Out (in)
.045 190 140 22-24 4.5
240 180 24-27 6.0
340 220 27-30 8.5 5/8-3/4
450 260 28-32 11.0
580 300 30-34 14.0
.052 165 160 24-26 5.0
250 220 25-28 7.5
390 280 27-31 10.5 3/4-1
545 340 29-33 13.5
730 400 32-36 18.0
1/16 145 200 25-27 6.0
200 260 27-30 8.0
295 320 30-34 11.5 3/4-1
380 380 32-36 14.0
500 440 33-37 18.5

* Voltage shown are for 100% CO2 gas. For 75%Ar+25%CO2 use 2 volts less    than shown here.

 

  DWA-55ESR      Flux cored wire for canbon steel


 Code Data:  AWS: A5.20 E71T-12MJ   /  ASME:SFA 5.20 
 Approved by ABS

  Sizes: (.045 X 44)

Download a complete brochure

  • All position flux cored wire for carbon steel
  • Can be used with 75% Ar + 25% CO2 shielding gas
  • Superior impact property at low temperature exposure.
  • 20ft-lbs @-40F is guaranteed.
  MXA-70C6      Metal cored wire for carbon steel

    Mxa -70c6.jpg (8881 bytes)
    Code Data:  AWS: A5.18 E70C-6M / ASME: SFA 5.18
    Approved by ABS

    Download a complete brochure
    Sizes: (.045 X 44, 550)  (.052 x 44, 550)  (1/16 X 44, 550)

  • Highly efficient Metal-Cored wire for carbon steel

  • Better deposition rate than solid wire or flux cored wire

  • It can be used with 75% Ar + 25% CO2 shielding gas or 90% Ar + 10% CO2

  DWA-81Ni1      Flux cored wire for 80ksi class steel
  DWA81ni1.jpg

Code Data:  AWS: A5.29 E81T1-Ni1MJ / ASME: SFA 5.29
  Approved by ABS

  Download a complete brochure
  Sizes: (.045 X 28)
  • Applicable to low temperature service down to -40F

  • Rutile slag system creates excellent weldability in all-positional welding with less spattering and less fume

  • It can be used with 75% Ar + 25% CO2 

  MG-51T         Solid wire for carbon steel
  
   Code Data:  AWS: A5.18 ER70-S6
   
Download a complete brochure
   Sizes: (.035 X 44, 550)  (.045 x 44, 550) 
  • Smooth cupper coating along with steady curvarture assure consistant quality in welding.


HOME

  Copyright © 2006 Kobelco Welding of America Inc.